---
title: 'Nordic Commercial Building Energy Benchmark 2026'
description:
    'Nordic commercial building energy benchmark 2026: Swedish lokaler heating+HW kWh/m² by type (EN0103) plus Nordic
    services-sector totals from public statistics.'
image: /images/articles/nordic-commercial-building-energy-benchmark.webp
image_alt: White concrete commercial building exterior under a clear sky
published_date: '2026-10-02 10:00'
---

_Photo by _[_Matt Reames_](https://unsplash.com/@mattreames?utm_source=frostlogic-mission-control&utm_medium=referral)_
on _[_Unsplash_](https://unsplash.com/?utm_source=frostlogic-mission-control&utm_medium=referral)_._

_Compiled by FrostLogic from public statistics. Not a proprietary portfolio study._

This Nordic commercial building energy benchmark is a citation asset, not a product pitch. It pulls the latest public
figures for Swedish non-residential premises (`lokaler`) intensity and puts them next to Nordic and EU services-sector
final-energy totals. The Swedish intensity rows come from Energimyndigheten's
[official energy statistics for lokaler](https://www.energimyndigheten.se/statistik/officiell-energistatistik/tillforsel-och-anvandning/energistatistik-for-lokaler/)
(EN0103), intensity reference year **2024**. Heating and hot water **totals** in EN0103_1 now run through **2025**. The
Nordic framing totals come from Nordic Statistics **ENER10** (Eurostat `nrg_bal_c` feed), reference year **2023**. Every
number below names its source. Where a cell is missing in the official table, we leave it blank rather than invent one.

If you came here looking for a single harmonised Nordic kWh/m² table by commercial building type across Denmark,
Finland, Iceland, Norway and Sweden: that table does not exist as one official publication. Say so up front, then use
what is published.

## How to read Nordic building energy figures

Two different kinds of number show up in Nordic and EU publications, and they answer different questions.

**Intensity** is energy per floor area, usually kWh/m² of heated area for a defined end-use scope. Swedish lokaler
statistics in EN0103 publish intensity for **heating and hot water only**. That is specific energy use for those end
uses, not whole-building property electricity, tenant plug loads, process refrigeration, or data-hall IT. Treat a
Swedish EN0103 row as a heating-and-HW intensity, not as a Portfolio Manager-style whole-building EUI.

**Sector totals** are final energy for an economic sector, usually in ktoe, PJ or TWh. Nordic Statistics ENER10 and
Eurostat energy balances report final consumption for the services sector (and other sectors) without dividing by heated
floor area. You can compare country shares and absolute totals. You cannot honestly turn those totals into kWh/m² by
office, school or retail without a floor-area denominator they do not publish in the same table.

That split matters for Nordic building energy statistics work. Sweden has a detailed lokaler intensity survey. The other
Nordic countries publish strong sector balances. Mixing the two without labelling units is how fake cross-country
intensity benchmarks get written.

Energimyndigheten also flags which years are survey years and which are modelled. There was no lokaler survey for 2015,
2017, 2018, 2020, 2021, 2023, 2024 or 2025; those years are model-estimated or carried forward with weather and stock
adjustments. The 2024 and 2025 releases were written forward from the 2022 survey, with weather and property-register
updates, as described in the agency's
[2026 news note on lokaler statistics](https://www.energimyndigheten.se/nyhetsarkiv/2026/ny-energistatistik-for-lokaler/).

## Sweden : lokaler kWh/m² by type

The worked table below is pulled live from Energimyndigheten's PxWeb table EN0103_9: energy use for heating and hot
water by type of premise, for year **2024**, **temperature-adjusted**, all heating systems, unit **kWh/m²** of heated
area. Labels are the agency's published English value texts for `Lokaltyp`. Premise types with no published value are
omitted.

| Type of premise (Energimyndigheten) | Heating + hot water, kWh/m² (2024, temperature-adjusted) |
| ----------------------------------- | -------------------------------------------------------: |
| All                                 |                                                    106.4 |
| Housing                             |                                                    109.3 |
| Hotel, restaurant, dormitory        |                                                    122.6 |
| Only resaurant                      |                                                    117.3 |
| Office and administration           |                                                    100.9 |
| Food premises                       |                                                    108.8 |
| Other trade                         |                                                     92.4 |
| Care 24/7                           |                                                    105.2 |
| Other care                          |                                                    101.7 |
| Schools                             |                                                    110.0 |
| Sport facilities                    |                                                    120.9 |
| Churches                            |                                                    107.3 |
| Teater, cinema                      |                                                     91.3 |
| Warm garage                         |                                                     90.7 |
| Other premises                      |                                                    109.0 |

Source: Energimyndigheten, EN0103_9, retrieved at build time for this article. A machine-readable copy of the same rows
is available as [CSV](/resources/nordic-commercial-building-energy-benchmark-2024.csv).

A few readings from the same Swedish statistical family, still heating and hot water only:

- **Actual** (not weather-corrected) total heating + hot water use for lokaler was **17.58 TWh** in 2025, against
  **17.87 TWh** in 2024 and **18.27 TWh** in 2023 (EN0103_1). The agency's 2026 news note rounds 2025 and 2024 to about
  17.6 and 17.9 TWh. Both 2024 and 2025 are model-estimated from the 2022 survey.
- **[Temperature-adjusted](/glossary/degree-days/)** totals were **18.39 TWh** in both 2025 and 2024, and **18.25 TWh**
  in 2023 (EN0103_1). After weather correction, the 2025 total matches 2024 even though the raw total fell.
- By **owner category**, temperature-adjusted intensity in **2024** (latest year in EN0103_7) was lowest for
  limited-company-owned lokaler at **103 kWh/m²** and highest for natural-person-owned lokaler at **123 kWh/m²**. The
  all-owner temperature-adjusted average was **106 kWh/m²**.

Offices at about 101 kWh/m² and "other trade" at about 92 kWh/m² sit below the all-lokaler average. Hotels/restaurants
and sport facilities sit above it. That ranking is useful for Sweden. It is not a Nordic typology ranking, because the
other countries do not publish the same premise-type intensity survey in one shared table.

Swedish commercial operators who need continuous meter and BMS context around these yearly intensities can also read our
notes on [energy monitoring](/platform/energy-monitoring/) and
[energy management for commercial buildings](/solutions/energy-management-commercial-buildings/).

## Nordic context : services-sector final energy

Nordic Statistics table **ENER10** ("Final consumption of energy by unit, sector, reporting country and time") reports
final energy by sector for Denmark, Finland, Iceland, Norway, Sweden and an EU aggregate. The services line in ENER10 is
coded `B102035` ("Service sector and other sectors"). These are **sector totals**, not kWh/m².

For reference year **2023**, ENER10 gives the following for services (and services as a share of each country's total
final energy consumption):

| Country | Services final energy (ktoe) | Share of national final energy |
| ------- | ---------------------------: | -----------------------------: |
| Denmark |                      1,891.9 |                         14.55% |
| Finland |                      2,903.0 |                         12.93% |
| Iceland |                        493.8 |                         16.23% |
| Norway  |                      3,140.5 |                         16.02% |
| Sweden  |                      4,165.8 |                         13.36% |
| EU      |                    117,930.1 |                         13.50% |

Source: Nordic Statistics ENER10, units `KTOE` and `PCENERCONS`, retrieved at build time. Using the conventional
conversion **1 ktoe = 11.63 GWh**, the five Nordic countries' services rows sum to about **12,595 ktoe**, or roughly
**146 TWh** of services-sector final energy in 2023. Sweden alone is about **48 TWh** on that conversion. Treat the TWh
figures as derived from the official ktoe rows, not as a separate official TWh release.

The EU services share in ENER10 (**13.5%** in 2023) matches the services share used in our companion piece on
[energy consumption in commercial buildings](/articles/energy-consumption-commercial-buildings/), which draws the same
Eurostat energy-balance family for EU context. Nordic Energy Research's 2025 report
[_Energy efficiency in the Nordics_](https://pub.norden.org/nordicenergyresearch2025-01/) is useful regional framing for
why services matter in the Nordic mix; it does not replace ENER10 as the quantitative source for the rows above, and we
do not invent Nordic kWh/m² intensities from it.

What this Nordic block is for: showing that services are a material slice of final energy in every Nordic country, in
the same ballpark as the EU aggregate. What it is not for: pretending those ktoe rows are office-or-school intensities.

## What the numbers do not tell you

Honesty section. Read this before you paste a row into a board pack.

1. **Swedish lokaler intensity is heating + hot water.** EN0103's kWh/m² rows in the worked table exclude most property
   electricity and almost all tenant or process loads. A building that looks "good" on heating intensity can still run
   hot on fans, pumps, lighting, IT or refrigeration. Comparing an EN0103 office row to a whole-building BMS electricity
   total is a category error unless you reconcile scopes first.
2. **There is no official harmonised Nordic kWh/m² table by commercial building type.** Denmark, Finland, Iceland,
   Norway and Sweden do not publish one shared premise-type intensity survey equivalent to EN0103 for all five. ENER10
   gives sector totals. EN0103 gives Swedish intensity. Keep them in separate columns.
3. **CBECS and ENERGY STAR are US method parallels, not Nordic substitutes.** US whole-building surveys and Portfolio
   Manager scores answer a different question with different floor-area and fuel conventions. Our guides on
   [energy consumption in commercial buildings](/articles/energy-consumption-commercial-buildings/) and
   [energy use intensity](/articles/energy-use-intensity/) cover those tools. Do not paste US median EUI numbers into a
   Nordic lokaler comparison and call them Nordic benchmarks.
4. **No FrostLogic or Explore portfolio statistics in this v1.** This asset is public-stats only. We are not mixing
   anonymised pilot intensities into the table.
5. **Model years and survey years are not the same thing.** When you cite 2024 Swedish lokaler intensity or 2025
   EN0103_1 totals, note that those releases are written forward from the 2022 survey with weather and stock
   adjustments. That is still the official series; it is not a fresh census of every premise.
6. **An energideklaration or Swedish energikartläggning is a different instrument.** A declaration class or a statutory
   large-enterprise audit (see [energikartläggning](/compliance/energikartlaggning/)) is not the same as EN0103's
   statistical intensity by lokaltyp. Do not treat them as interchangeable primary keywords or interchangeable numbers.

## From benchmark to action

A yearly public intensity table answers "where do Swedish lokaler sit on heating and hot water, by type?" It does not
tell an operator which AHU is fighting itself this week.

The practical sequence we use with commercial portfolios looks like this:

1. **Benchmark against a published peer intensity** for the right country and scope (this article for Swedish lokaler
   heating+HW; US operators often start from Portfolio Manager instead). See also
   [energy benchmarking for commercial buildings](/articles/energy-benchmarking-commercial-buildings/).
2. **Convert your own meters into a comparable intensity** with a clear EUI definition and floor-area basis. The formula
   and traps are in [energy use intensity](/articles/energy-use-intensity/). The same metered intensity is what makes a
   [CRREM pathway Misalignment Year](/articles/crrem-pathway/) honest when you move from peer tables to 1.5°C pathway
   alignment.
3. **Move from annual comparison to continuous read** when the gap is operational rather than design-stage: meter and
   BMS history, ranked by cost, which is the commercial path on
   [energy management for commercial buildings](/solutions/energy-management-commercial-buildings/) and the measurement
   layer on [energy monitoring](/platform/energy-monitoring/).

Write access starts off. Writes stay off until an operator grants a scope. That is the starting state for connecting
existing BMS and meter feeds; it is not a claim that the platform never writes.

## Frequently asked questions

**Does this Nordic commercial building energy benchmark include property electricity?** No. The Swedish EN0103 intensity
table in this article is heating and hot water only. Property electricity and tenant loads sit outside those rows.
ENER10 services totals are whole-sector final energy, which is a different scope again.

**Which year should I cite for Swedish lokaler intensity?** Cite **2024** for the EN0103 intensity rows (EN0103_9) and
owner intensities (EN0103_7) used here. Cite **2025** for the EN0103_1 heating and hot water totals, and note that
Energimyndigheten model-estimated both 2024 and 2025 from the 2022 survey. For Nordic services-sector totals from
ENER10, cite **2023**, the latest year in the table at retrieval time.

**How is this different from an energideklaration?** An energideklaration is a building-level energy performance
document under Swedish building rules. EN0103 is national official statistics for lokaler, published as survey and
modelled series by Energimyndigheten. They serve different legal and analytical jobs. This article does not publish
class-letter distributions.

**How does this relate to energikartläggning?** Swedish large-enterprise energy auditing under the energikartläggning
rules is a statutory audit cycle, not a public kWh/m² typology table. Continuous monitoring between audits is a separate
follow-up conversation; the compliance page is at [energikartläggning](/compliance/energikartlaggning/).

**Can I use ENERGY STAR Portfolio Manager scores as Nordic benchmarks?** Not as a drop-in. Portfolio Manager and CBECS
are US peer tools built on US survey conventions. They are useful method parallels and are covered in our
[benchmarking](/articles/energy-benchmarking-commercial-buildings/) and [EUI](/articles/energy-use-intensity/) guides.
They are not Nordic official intensities.

**How should I compare these figures to BMS or utility meters?** Align scope first: heated area definition, whether hot
water is included, whether electricity beyond heating is included, and whether the meter boundary is landlord-only or
whole building. A temperature-adjusted EN0103 row will not match a raw calendar-year electricity total from a BMS
export.

**Will you update this benchmark every year?** Yes. The point of a citation asset is to refresh when Energimyndigheten
and Nordic Statistics publish the next reference year. We will revise the worked table and the ENER10 framing block
rather than leave stale intensities unmarked.

**Where can I download the Swedish intensity rows?** Use the
[CSV of the 2024 EN0103_9 rows](/resources/nordic-commercial-building-energy-benchmark-2024.csv) published with this
article, or query Energimyndigheten's PxWeb EN0103 tables directly for the live series.

## What's your building not telling you?

Tell us what you are trying to figure out: a Swedish lokaler intensity that looks off, a portfolio that will not
reconcile to public benchmarks, or BMS meters that never quite match the annual filing. We listen first, then say
straight whether Explore helps. 30 or 60 minutes, your pick. No commitment either way.

[Talk it through](/contact-us/)

For the commercial product path without a call first, see
[energy management for commercial buildings](/solutions/energy-management-commercial-buildings/).
