Regin integration
Regin analytics, from the EXOflex, Corrigo or EXOscada you already run.
Explore connects to your Regin estate over BACnet or Modbus and returns one ranked queue: what to fix first, where, and what it costs to wait.
Book a time directly- Writes only where you allow
- No hardware
- EU-hosted
The problem
EXOflex and Corrigo already run. The queue does not.
Regin EXOflex controllers, Corrigo AHU units and EXOscada operator stations run a large share of Swedish commercial estates; Arrigo BMS is the current SCADA successor on sites that have migrated. Regin analytics, as most sites actually run it, is a SCADA screen in the plant room and trend logs that stay closed until something has already failed. Operators who also use Arrigo keep that SCADA; it stays theirs.
Explore reads those same BACnet or Modbus points continuously. Every finding is grounded in the physics of your building by FrostDynamics, our world model, and lands in one queue, ranked by what ignoring it costs. EXOflex, Corrigo, EXOscada and Arrigo keep control of the building. You finally get the analytics layer on the same data.
What it does
From Regin points to a ranked queue.
Anomaly detection on live Regin data.
Seven detection methods run on the points EXOflex, Corrigo, EXOscada and Arrigo already trend: temperatures, valve positions, runtimes, energy. A compressor drifting out of its envelope shows up days before the alarm would have fired.
Forecasts with confidence bounds.
Demand and consumption forecasts per building, checked against the physics. What-if simulation tests a setpoint change in the model before anyone touches the live station.
One ranked queue across the estate.
Regin sites next to Siemens, Schneider, Trend or meters. Explore normalises them into one model and ranks findings by what ignoring them costs.
Optional write in granted scopes.
Smart Schedules and permissioned setpoint changes stay off until you grant a scope. Outside that scope, nothing moves. The Regin station stays the control layer.
Deployment
BACnet or Modbus on the station you already run.
BACnet or Modbus from EXOflex, Corrigo, EXOscada or Arrigo.
EXOflex is freely programmable; Corrigo ships pre-programmed for AHU and ventilation with BACnet, Modbus and EXOline; EXOscada and Arrigo BMS expose the operator layer. The FrostLogic Edge Agent on the existing PC or server reads the points, and writes back to the points you have granted it. Write starts off. Installed remotely, usually in an afternoon. No new plant-room hardware.
Agent on the existing station.
The FrostLogic Edge Agent sits beside the EXOscada, Arrigo or plant-room PC you already have, reads your BMS, meters and sensors over BACnet or Modbus, and writes back only where you grant a scope.
Credentials where a path exists.
Estates already exposing data through a credentials path connect the same day. Mixed portfolios that also run non-Regin buildings land in the same feed.
The question every Regin estate asks
We already have Arrigo or EXOscada. Why Explore?
Keep Arrigo or EXOscada if it earns its keep.
Arrigo BMS is Regin's current SCADA/EMS successor to EXOscada. If you already use either, keep it. Explore is the analytics layer on the same BACnet or Modbus data: detection, forecasting and a portfolio queue Arrigo was never built to own across mixed vendors.
Sees past one SCADA.
An EXOscada or Arrigo station sees the sites it was commissioned for. Real portfolios mix Regin with Siemens, Schneider, Trend and meters. Explore normalises all of it into one queue.
Physics, not another dashboard.
FrostDynamics checks every finding against the building thermodynamics before it reaches your queue. Pure pattern tools cannot do that across the estate.
At a glance
- Works with
- EXOflex, Corrigo, EXOscada, Arrigo BMS and Regin estates that expose BACnet or Modbus points
- Connection
- BACnet or Modbus via local FrostLogic Edge Agent
- Write access
- off by default, granted per scope
- Hardware
- none
- Data residency
- EU, GDPR-native
- First findings
- in the first week
- Also reads
- other BMS, meters, IoT sensors in the same portfolio
Regin is one route in. Explore also reads Siemens Desigo, Schneider EcoStruxure, Honeywell Niagara, Distech Controls, Johnson Controls Metasys, Kieback&Peter, Honeywell Trend and Bastec into the same model, ranked with portfolio-wide BMS analytics. The analytics layer itself lives on the FrostLogic Explore platform page.
Before you ask
Regin analytics, the questions we get.
Yes. The FrostLogic Edge Agent on the existing PC or server reads your BMS, meters and sensors over BACnet or Modbus, and writes back to the points you have granted it. Write starts off. You do not need a BMS cloud subscription or new hardware.
No. The connection is software: an agent on the existing EXOscada, Arrigo or plant-room PC. Nothing gets mounted, wired or certified.
Yes, once you turn it on. Write access starts off. You grant it one scope at a time, and Explore proposes the change with its reasoning and the expected effect before anything moves. You choose whether that proposal waits for someone to approve it, or runs automatically inside the scope you set. Points outside that scope stay untouched. The Regin station stays the control layer.
An agent install is typically an afternoon, done remotely. Where a credentials path already exists, data can flow the same day. The slow part is rarely the technology; it is finding the person with access to the plant-room PC.
EXOflex, Corrigo, EXOscada and Arrigo BMS over BACnet and/or Modbus. If your Regin generation exposes points the agent can read, Explore connects. Tell us what you run if you are unsure.
No. FrostLogic is independent. We are not affiliated with or endorsed by Regin. Explore connects to the EXOflex, Corrigo, EXOscada or Arrigo estate you already run.
Connect one building. Three weeks. We show you what we find.
Pick one building, even a couple of fan coil units. We connect it remotely, let two to three weeks of data accumulate, then go through the findings with you. There's nothing to install and no commitment past the pilot.
What's your building not telling you?
Tell us what you're trying to figure out: energy drift, a BMS you don't trust, compliance you're chasing. We listen first, then tell you straight whether Explore helps. 30 or 60 minutes, your pick. No commitment either way.
Regin, EXOflex, Corrigo, EXOscada, EXOline and Arrigo are trademarks of their respective owners. FrostLogic is an independent vendor and is not affiliated with or endorsed by Regin.